1 | Item | Stainless Steel Sheets/Coils |
2 | Material | 201, 202 ,304 ,304L ,316 ,316L , 309S,310S ,317L , 321, 409, 409L, 410, |
3 | Surface | 2B, BA, HL, 4K, 6K, 8K , No.1, No. 2, No.4, SB |
4 | Standard | AISI, ASTM, DIN, EN, JIS, etc |
5 | Specification | (1) thickness: 3.0mm- 16.0mm |
6 | Application | (1) Construction, decoration |
7 | Advantages | (1) High surface quality, clean, smooth finish |
8 | Package | (1) Wooden pallets |
9 | Delivery | within 10 working days once we get the deposit, |
10 | Payment | T/T, L/C |
11 | Shipment | FOB/CIF/CFR |
12 | Productivity | 500tons/month |
13 | Note | Any size can be customized as requirement. |
1 | Item | Stainless Steel Sheets/Coils |
2 | Material | 201, 202 ,304 ,304L ,316 ,316L , 309S,310S ,317L , 321, 409, 409L, 410, |
3 | Surface | 2B, BA, HL, 4K, 6K, 8K , No.1, No. 2, No.4, SB |
4 | Standard | AISI, ASTM, DIN, EN, JIS, etc |
5 | Specification | (1) thickness: 3.0mm- 16.0mm |
6 | Application | (1) Construction, decoration |
7 | Advantages | (1) High surface quality, clean, smooth finish |
8 | Package | (1) Wooden pallets |
9 | Delivery | within 10 working days once we get the deposit, |
10 | Payment | T/T, L/C |
11 | Shipment | FOB/CIF/CFR |
12 | Productivity | 500tons/month |
13 | Note | Any size can be customized as requirement. |
Surface Finish | Definition and Application | |
No.1 | The surface is finished by heat treatment and pickling or processes corresponding there to after hot rolling | |
2D | The finishes after cold rolling, by heat treatment, pickling or other equivalent treatment | |
2B | The finish after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to give an appropriate luster | |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror | |
NO.3 | Polished with abrasive belt of grit#100~#200,have better brightness with discontinuous coarse stria | |
NO.4 | Polished with abrasive belt of grit#150~#180,have better brightness with discontinuous coarse stria | |
Hairline | Polished with abrasive belt of grit#150~#320 on the NO.4 finish and has continuous streaks | |
8K | The product have excellent brightness and prefect reflexivity can be the mirror |
Surface Finish | Definition and Application | |
No.1 | The surface is finished by heat treatment and pickling or processes corresponding there to after hot rolling | |
2D | The finishes after cold rolling, by heat treatment, pickling or other equivalent treatment | |
2B | The finish after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to give an appropriate luster | |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror | |
NO.3 | Polished with abrasive belt of grit#100~#200,have better brightness with discontinuous coarse stria | |
NO.4 | Polished with abrasive belt of grit#150~#180,have better brightness with discontinuous coarse stria | |
Hairline | Polished with abrasive belt of grit#150~#320 on the NO.4 finish and has continuous streaks | |
8K | The product have excellent brightness and prefect reflexivity can be the mirror |
specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max. | |||||||
JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
ASTM Specification | |||||||||||
Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max | |||||||
ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
0.70 Max | |||||||||||
S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
1.00 Max | |||||||||||
S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
0.5 Max. | |||||||||||
S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |
specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max. | |||||||
JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
ASTM Specification | |||||||||||
Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max | |||||||
ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
0.70 Max | |||||||||||
S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
1.00 Max | |||||||||||
S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
0.5 Max. | |||||||||||
S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |