Stainless Steel Checkered Sheet / Plate
TISCO, JISCO, BG, ZPSS, YUSCO
7219339000
Availability: | |
---|---|
Quantity: | |
Product Name | Checkered Stainless Steel Sheet |
Thickness | 2-8mm |
Length | 2m-12m or as your requirements |
Width | 600mm-1800mm |
Tolerance | Thickness: +/-0.02mm, Width:+/-2mm |
Material grade | 201,202,304,310S,310,309,309S,316,316L,410,410S,420,430..... |
Pattern | Tear Drop, Diamond, Round Bean, Five Bars... |
Standard | ASTM,DIN,JIS,BS,GB/T |
Certificate | ISO, SGS, BV.... |
Delivery times | Delivered within 20 workdays after the receipt of deposit |
Package | tied up with steel strips and wrapped with water proof paper |
Application Range | household goods,medical equipment, building materials, chemical, |
Advantages | 1. Reasonable price with excellent quality |
2. Abundant stock and prompt delivery | |
3. Rich supply and export experience, sincere service |
Surface finish | Characteristics and application |
2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
No.1 | Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc. |
No.4 | Polished with abrasive belt of grit #150- #180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
Product Name | Checkered Stainless Steel Sheet |
Thickness | 2-8mm |
Length | 2m-12m or as your requirements |
Width | 600mm-1800mm |
Tolerance | Thickness: +/-0.02mm, Width:+/-2mm |
Material grade | 201,202,304,310S,310,309,309S,316,316L,410,410S,420,430..... |
Pattern | Tear Drop, Diamond, Round Bean, Five Bars... |
Standard | ASTM,DIN,JIS,BS,GB/T |
Certificate | ISO, SGS, BV.... |
Delivery times | Delivered within 20 workdays after the receipt of deposit |
Package | tied up with steel strips and wrapped with water proof paper |
Application Range | household goods,medical equipment, building materials, chemical, |
Advantages | 1. Reasonable price with excellent quality |
2. Abundant stock and prompt delivery | |
3. Rich supply and export experience, sincere service |
Surface finish | Characteristics and application |
2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
No.1 | Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc. |
No.4 | Polished with abrasive belt of grit #150- #180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max. | |||||||
JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
ASTM Specification | |||||||||||
Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max | |||||||
ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
0.70 Max | |||||||||||
S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
1.00 Max | |||||||||||
S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
0.5 Max. | |||||||||||
S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |
specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max. | |||||||
JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
ASTM Specification | |||||||||||
Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max | |||||||
ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
0.70 Max | |||||||||||
S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
1.00 Max | |||||||||||
S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
0.5 Max. | |||||||||||
S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |